A UK Mains PSU adapter with a D.C. plug suitable for all Gemalto Cellular Terminal-Modems.

The plug-top supply has interchangeable adaptors for use in different countries and is supplied with 3-Pin adapter suitable for use in the UK & Ireland. Enquire for versions suitable for other regions.

Input voltage range is 100 to 240V A.C.

Output is 12V D.C. @ 1.3A max

A Univerasl Mains PSU adapter with a D.C. plug suitable for all Cinterion (Gemalto) Cellular Modem-Terminals.

The plug-top supply has interchangeable adaptors for use in different countries and is supplied with adapters suitable for use in the UK & Ireland, EU, USA and Australia.

Input voltage range is 100 to 240V A.C. 50/60Hz

Output is 12V D.C. @ 1.5A max - RJ12 connector

D.C. Power cable for use with all Gemalto Cellular Terminal-Modems.

The RJ12 plug has all six wires connected allowing control of the Modem via the Power-Down and Ignition-IN signals. The function of each coloured wire is labelled.

Note that this cable uses Stranded wire 18 x 0,10mm and not the thinner 7 core cable used in telephone patch leads. Cable length is approx. 1.5 meters. Further information available here: DC power cable datasheet

A Mains in-line PSU with mechanical fixing lugs and a D.C. plug suitable for all Gemalto Cellular Terminal-Modems.

The power supply has a captive mains cable terminated with tinned wires suitable for direct connection to a mains supply (fused outlet).

The DC connector is wired with IGN signal active so that Gemalto Terminals will automatically start when power is first supplied.

Input voltage range is 100 to 240V A.C.

Output is 12V D.C. @ 1.0A max

8 and 12-Pin connectors suitable for the GPIO interface sockets found on Gemalto BGS5T, EHS5T, EHS6T-USB and EHS6T-LAN Modem-Terminals.

Very easy to use - simply insert a prepared wire and you're done. To release, each signal wire has an integrated push button. Rated for wire size range 0.14 - 1.5 mm² / AWG 26 - AWG 16

Gemalto Modem-Terminals support a variety of serial interfaces, analog input with reference out as well as GPIO signals, so these connectors are very useful for Java and other applications which extend the application and operation of the wireless devices.

A Manufacturer supplied mains PSU suitable for all Robustel Gateways and Routers.

The D.C. output cable is crimp terminated ready for attaching D.C. power connectors supplied with each Robustel Device..

Plug-top design allows interchangeable adaptors for use in different countries/regions. Supplied with single adapter or a set of 4 covering most of the world.

Input range: 100 to 240V A.C. Output is 12V D.C. @ 2.0A max

Our part numbers: Rob-ACC-E011005 (UK & Ireland 3-pin) & Rob-ACC-E011008 (EU 2-pin)

A 35 mm DIN-Rail Mount bracket designed for all Robustel Gateways and Routers.

The bracket is attached via 3 threaded holes in the devices. Four screws are supplied in each kit.

Our part number: ROB-ACC-E015031

Wall Mount bracket designed for Robustel Gateways and Routers (except the R2000 Router which requires a different style bracket).

The bracket is attached via 3 threaded holes in the device. Four screws are supplied in each kit.

Our part number: ROB-ACC-E015025

Wall Mount brackets designed for Robustel R2000 & R2000-DUAL Routers.

Each bracket is attached via 2 supplied screw and threaded holes in the device.

Our part number: ROB-ACC-E015039

A 9-Pin D-type Male connecter to terminal block adapter for easy access to individual signals on a device DB9 interface.

Very useful for accessing RS485 or additional GPIO signals carried over the DB9. The silk screen pin designations relate to Robustel Gateways though it can be used for any device.

Our part number: ROB-ACC-C001406

The Typhoon6700 range of housings are specifically created for Robustel R2000, R2000-Ent, R3000 & R3000-Lite industrial Routers.

Each IP67 rated housing is supplied with the Robustel Router pre-integrated with external access to all connections. Suitable for wall or Pole mounting.

Various power-supply options allow for renewable energy powered systems, AC & DC power and support for P-o-E feature, depending upon the specific Router.

The Coherent Modbus Pulse Counter is an innovative device for metering applications where a record of pulse count data needs to be kept from multiple meters. The device has 8 pulse-count input channels which can be connected to meters over more than 250 meters of cable.

Pulses from the connected meters are counted, sorted into interval data and buffered in the internal flash memory for retrieval via the Modbus interface. In the event of a power failure an internal rechargeable Lithium-Ion battery continues to operate the device for up to 500 Hours, reading and storing pulses as configured so that no readings or data are lost.

The device is intended for high reliability applications, operating 24/7. Once configured the Modbus Pulse Counter operates autonomously recording pulse counts periodically ready for reading over the RS485 interface.